Satellite TV Dish – Do It Yourself Guide on Satellite TV System Installation
Saturday, October 23rd, 2010Installation of satellite TV system can be present ready by subscribers themselves. But to execute so subscribers ought to possess a little prior experience of liability tasks like installing a television projection outside, decent a ceiling fan, installing a garage exit opening and so on.
The various steps integrated in the sphere of self installation of Satellite TV logic are explained lower than:
Broad-spectrum location survey:
Previous to installing Satellite television logic, subscribers ought to maintain a broad-spectrum location survey the same as to someplace the satellite dish ought to be present installed. They ought to check with the following points:
* Locate a location with the aim of has a apparent outlook of the southern sky. Obstructions like trees, leaves, buildings, or else windows ought to not be present near in the sphere of concerning.
* Imagine an arc ranging from 30 to 60 degrees beyond the horizon.
Decision Dish pointing coordinates:
Whilst subscribers are reliable the same as to someplace the satellite dish has to be present mounted, they ought to locate the Dish pointing coordinates. To execute this, at the outset they ought to fix the satellite receiver to their television and thereafter get the gist the on-screen menu logic. The on-screen menu logic strength of character help subscribers to locate dish pointing coordinates in favor of their location. The process of linking the television to a receiver and using the on-screen menu are explained lower than.
Fix the Receiver to a television
To fix a satellite receiver to a television, subscribers ought to get the gist the following steps:
* fix a coaxial cable to the dazed TO television jack located on the satellite receiver and after that to the projection in the sphere of jack located on television.
* Plug both the television and the satellite receiver into an AC outlet.
* metamorphose on the television and the satellite receiver.
* in the sphere of legal action the satellite receiver has a CH3/CH4 switch on its back, refrain the television to channel 3 or else 4 and if it does not maintain the switch, please refrain to UHF channel 14 or else cable channel 65.
Depletion the Dish Pointing Menu Screen
The satellite receiver consists on-screen menu with the aim of helps subscribers in favor of having dish pointing coordinates in the sphere of their own location. To navigate through the menu logic, front buttons located on the front panel of the receiver can be present used; otherwise the remote can be present used in favor of this target. To depletion the on-screen menu subscribers ought to get the gist the receiver’s handbook and by this means they ought to locate the dish pointing coordinates. Whilst the coordinates are obtained, subscribers ought to added video the altitude and azimuth records. Altitude amount is the up/down slant with the aim of the dish is pointed and Azimuth amount is the side-to-side direction with the aim of the dish is pointed.
Precise location survey:
Whilst the dish pointing coordinates are found, subscribers can proceed with the task of mounting the satellite dish. But previous to with the aim of they ought to again undergo a precise location survey to check whether the location selected in favor of mounting the satellite receiver is the appropriate single or else not. In favor of this they ought to get the gist the steps enlisted lower than:
* reach to the location (selected in favor of installing satellite receiver) and presume a extent in the sphere of the palm of furnish and presume it plow the needle of the extent stops poignant. The dark or else the decorated partly of the extent needle at all times indicates the northern direction.
* Rotate the extent so with the aim of the dark part of the extent needle indicate the “N” (that denotes north) on the extent. The extent is at present aligned with the northern direction. The edges of the extent maintain tick lettersrs which speak for the Azimuth degrees.
* Locate the tick lettersrs on the extent with the aim of corresponds to the Azimuth amount famous earlier. This amount is the Azimuth setting direction. The Azimuth setting direction is the direction in the sphere of which the dish ought to be present pointed to receive satellite signals.
* Check with the aim of near are rebuff obstructions in the sphere of the gesticulate path. This can be present ready by raising single arm up to the altitude slant recorded earlier.
Mounting options along with mounting commands:
Whilst subscribers are set with the mounting location in favor of the satellite dish, they ought to added privileged a place in favor of mounting the flagpole. Near are many options the same as to someplace a flagpole can be present mounted. Subscribers need to mount the flagpole on their well-located spaces. The various options in favor of mounting the satellite dish are explained lower than.
Mounting the flagpole on solid forest or else round siding:
In favor of mounting the flagpole on a solid forest or else round siding subscribers need to maintain the following tools:
* exciting drill
* Bubble Level
* Wrench
* Pencil
The proceeding steps are to be present followed to mount the flagpole on a solid forest or else round siding:
* Locate the meeting place of a stud to mount the flagpole end.
* position the mounting end in the sphere of such a take with the aim of the meeting place line is centered on the stud or else wooden outside.
* If the flagpole is to be present mounted on a sloped or else vertical outside, after that check and confirm with the aim of the meeting place line is effortlessly vertical.
* or else mounting the flagpole, smudge the two meeting place holes and four outside corner holes of the mounting end with a pencil.
* Remove the mounting end and drill two 3/16” holes in the sphere of the two meeting place outlet locations and four 3/16” holes in the sphere of the four outside corner locations.
* untie the nuts on the mounting end so with the aim of the flagpole can be present rotated to access both the meeting place mounting holes.
* presume the mounting end in excess of the holes in the sphere of such a way with the aim of the top of the flagpole strength of character rotate and indicate straight up.
* place in two lag screws on the two meeting place holes on the mounting end and tighten them suitably.
* position washers and place in screws on the four outside holes and tighten them securely.
Mounting the flagpole on the brick or else poured material:
While mounting the flagpole on brick or else poured material it ought to be present set with the aim of the barrage has strength of by the side of smallest amount 300 pounds of pull-out pressure.
As soon as the strength of the barrage is set, subscribers ought to maintain the following tools in favor of mounting the flagpole on the brick or else poured material:
* exciting drill
* Bubble Level
* Screwdriver
* Hammer
* Wrench
* Pencil
The following steps are to be present followed while mounting a flagpole on brick or else poured material:
* presume the mounting end in excess of the mounting outside.
* in the sphere of legal action of vertical or else sloped outside, check and confirm with the aim of the meeting place line is in addition vertical.
* smudge the four outside holes on the mounting end.
* Drill four holes on the distinct location.
* place in four double-expansion anchors.
* untie the nuts on the mounting end so with the aim of the flagpole can be present rotated to access both meeting place mounting holes.
* place in and tighten the structure screws.
Mounting the flagpole on a hollow or else cinder lump barrage:
While mounting the flagpole on hollow or else cinder barrage it ought to at all times be present taken worry of, with the aim of satellite dish doesn’t approach under an eave or else threaten for the reason that with the aim of would lump or else somewhat obstruct the dish from apparent outlook of southern sky.
To mount the flagpole on a hollow or else cinder lump barrage subscribers ought to maintain with them, the following tools:
* exciting drill
* Bubble level
* Screwdriver
* Wrench
* Pencil
The following steps are to be present pragmatic while mounting the flagpole on a hollow or else cinder lump barrage:
* While installing the togglers in the sphere of cinder blocks it ought to be present famous with the aim of they are positioned in the sphere of the focal point of the lump. To take the end of the flagpole on the barrage, gauge 7-1/2” from single frame of the lump and smudge the meeting place of the lump.
* Place the mounting end of the flagpole on the distinct place.
* Level the meeting place line of the mounting end using a bubble level.
* smudge the four outside corner holes.
* Remove the mounting end and drill holes on the distinct spaces.
* Install the togglers. The installation includes the following steps:
1. Fold single conclusion of the metal channel along with the plastic bind and carefully slide it through the outlet.
2. Wrench the ring so with the aim of the metal channel rests flush behind the barrage. At present presume the ring unyielding and slide the plastic cap along with the bind plow the cap is flush with the barrage.
3. Get behind the straps so with the aim of they snap inedible with the barrage.
4. Go over the same process in favor of all four holes.
5. Untie the nuts on the mounting end so with the aim of the flagpole can be present rotated to access both meeting place mounting holes.
6. Place in and tighten the structure screws.
Mounting the Dish on a pole:
While mounting a dish on a pole it ought to at all times be present famous with the aim of the installation is not ready in the sphere of wet or else marshy areas and the pole ought to reach by the side of smallest amount 3 feet lower than the outside. The pole which replaces mounting end and flagpole congregation ought to be present stuck.
Or else mounting a dish on a pole subscribers ought to maintain the following tools:
* Bubble level
* Screwdriver
* Hammer
* Hacksaw
* stake outlet digger
* Pencil
To mount the satellite dish on a pole the following steps are to be present followed.
* at the outset dig a 36” deep and 8-12” ample outlet by the side of the mounting location.
* cut out a 45 degree slant by the side of the substructure of the pole to prevent it from rotating in the sphere of the material in excess of occasion.
* Level the pole using the bubble level. Level the pole by the side of two various locations with the aim of are by the side of real angles to both other.
* Fill the outlet with quick drying fasten together. Pour fasten together up to two inches from the top of the outlet.
* Mount the dish on the pole whilst the fasten together is completely dry.
Mounting the flagpole on a roof:
The Roof ought to be present the carry on resort in favor of mounting a dish for the reason that many problems could rise in excess of occasion. However a dish ought to be present mounted on a dry place of the roof and not on wet spaces, slate and that.
To mount a flagpole on the roof subscribers ought to maintain the following tools:
* exciting drill
* Bubble Level
* Wrench
* Ladder
* Pencil
The mounting of a flagpole on a roof includes the steps enlisted lower than:
* Locate the meeting place of a rafter someplace the mounting end of the flagpole need to be present placed.
* presume the mounting end in the sphere of a take so with the aim of the meeting place line is centered on a rafter.
* progress to reliable, with the aim of the meeting place line is effortlessly vertical.
* smudge the six holes in the sphere of the mounting end.
* Remove the mounting end and drill holes in the sphere of two meeting place line locations the same as well the same as the four outside corner locations with the aim of were distinct earlier.
* Fill all holes with tiny amount of roof sealant.
* presume the mounting end in excess of the holes in the sphere of such a way with the aim of the top of the flagpole strength of character rotate and indicate straight up.
* place in and tighten all the screws.
* Seal the mounting end with roof sealant.
Leveling of the flagpole:
Whilst the mounting of the satellite receiver is accomplished, subscribers can move on with the task of leveling the flagpole.
Leveling the flagpole is single of the nearly everyone of great consequence tasks in the sphere of the installation of Satellite television logic. Leveling of the flagpole include leveling in the sphere of both Side-to-side and front-to-back direction. These two types of leveling of the flagpole are explained lower than.
Leveling side-to-side:
To check whether the flagpole is leveled side-to-side or else not, subscribers ought to place a bubble level on the flagpole. The bubble ought to be present centered in the sphere of the level’s window.
Leveling Front-to-Back:
To level the flagpole in the sphere of Front–to–Back direction, subscribers ought to consent to the mounting end move without restraint. Subscriber can execute this by loosening the two bolts and thereafter check the Front-to-back take by introduction the bubble level. Subscribers ought to in addition check with the aim of the bubble level is centered. As soon as this, subscribers ought to secure the flagpole to the mounting end by tightening two bolts.
Final Dish congregation:
As soon as leveling the flagpole subscribers can proceed added with the step of final dish congregation. To execute this, subscribers ought to get the gist the steps enlisted lower than:
* Place the LNB arm of the satellite dish on top of the flagpole or else pole.
* get behind the coaxial cable through the substructure of the flagpole. Sphere the cable and pass it through the LNB support arm.
* position a little silicone grease on the LNB connector and fix the conclusion of the Coaxial cable to the LNB.
* Place the conclusion of the LNB into the conclusion of the support arm.
* Locate the special curse retainer nut and place in this into the LNB mounting outlet located on top of the LNB support arm.
* Locate the president screw and place in it into the LNB mounting outlet from the substructure of LNB support arm and thereafter tighten the screw.
* Locate the preparation hardware namely bolt, star washer and nut.
* place in the bolt and clip the envoy (ground) wire to the end of the flagpole. Fix the other conclusion of the same wire to the preparation lump.
Cable estimate procedure:
As soon as assembling the dish, subscribers ought to proceed with the task of routing and preparation the cable. The subscribers ought to decide the same as to someplace they poverty their cables (for Satellite television connection) to enter their homes. They ought to in addition configure roughly how much cable they really require in favor of the connection. In favor of this subscribers ought to check with the points enlisted lower than:
* at the outset locate the central building ground. In the sphere of central building ground the satellite dish ought to be present stuck via cable preparation lump to a single indicate. The following is a tilt of right preparation points of a building:
1. Stuck interior metal cold irrigate pipe which ought to be present inside five feet from the indicate from someplace it enters the building.
2. Stuck harsh service raceway.
3. Stuck electrical service equipment enclosed space.
4. Eight-foot preparation pole driven into the ground(this ought to be present bonded to the central building ground by amount 6 or else heavier bonding wire).
5. Other preparation electrodes with the aim of comply with sections 250 and 810 of the inhabitant Electrical Code (NEC).
* at present wish an acceptable and well-located location to ground the cable preparation lump. The preparation lump ought to be present placed closer to the place someplace the cable would enter the farmhouse.
* Decide a right place in favor of the satellite receiver inside the farmhouse.
* just the once the place in favor of the satellite receiver is categorical estimate the amount of cable desired in favor of both of the following:
1. Single RG-6 coaxial cable with ground wire to run from the dish to a preparation lump. Separate coaxial cable ought to be present provided in favor of both LNB output.
2. Single RG-6 coaxial cable (per LNB output) to run from the preparation lump to both of satellite receiver.
3. Preparation wire to run from the preparation lump to the central building ground.
Routing and preparation the cables:
In favor of routing and preparation the cables, subscribers need to get the gist the steps enlisted lower than:
* clip the preparation lump to the region of the farmhouse closer to the coaxial cable account indicate. Anchors, togglers or else wooden screws could be present desired in favor of the target.
* Route the coaxial cable and envoy (ground) wire from the substructure of the flagpole to the preparation lump.
* position a little silicone grease on the connector and fix the coaxial cable to the preparation lump.
* Locate the central building ground.
* clip the preparation wire to the preparation lump by introduction it through the wire outlet in the sphere of the preparation lump and tightening the screw.
Route the preparation wire from the preparation lump to the central building ground and fix to the central building ground.
Running cable inside the farmhouse:
While running the cable into the farmhouse, the following steps are to be present followed:
* Drill a outlet in the sphere of the place someplace the coaxial cable would enter the farmhouse.
* fix the RG-6 coaxial cable with the aim of strength of character go on preparation lump to the receiver.
* Route the coaxial cable through the farmhouse to the back of the receiver.
* depletion a silicone sealant to seal all outside links and the holes drilled in favor of the account of the coaxial cables.
Final cable links:
The following steps are to be present followed in favor of accomplishing the final cable connection:
* fix the RG-6 coaxial cable to the SATELLITE in the sphere of jack located by the side of the back of the receiver.
* Take a phone inedible the hook to prevent exciting shock from incoming calls.
* fix a phone cord from the back of the receiver to a phone jack.
Acquiring and tuning the signals:
As soon as the completion of installation of satellite dish and routing of cables, subscribers can at length convey on with acquiring and tuning satellite signals. In favor of this, subscribers ought to get the gist the steps enlisted lower than:
* bend in two check the altitude and azimuth settings.
* Check and confirm whether the altitude indicator (the frame of metal, not the washer or else the bolt) is aligned to the correct altitude or else not.
* Verify the azimuth setting on the dish with the help of a extent.
* Check if proper satellite signals are customary or else not.
* whilst subscribers acquire proper signals, after that a little fine tunings adjustments to the dish ought to be present ready to receive the highest on the cards gesticulate. In favor of dish pointing in a row refer to the receiver handbook.
* whilst subscribers are reliable with the aim of the satellite dish is receiving proper satellite signals after that the carry on step with the aim of they need to get the gist is to call the instruct providers to order in favor of television programs. Subscribers in addition need to read the satellite receiver’s command handbook in favor of other in a row and commands more or less how to depletion the various skin texture to be had by the Satellite television providers.